교원검색

교원프로필

교원에 대한 정보를 나타내는 표입니다.
성명	Barlat Frederic Gera
소속	철강 · 에너지소재대학원
전화번호	279-9022
E-mail	f.barlat@postech.ac.kr
Homepage	https://sites.google.com/site/mmlpostech/home

학력

1982.07 ~ 1984.05 INSTITUT NATIONAL POLYTECHNIQUE DE GRENOBLE (박사-연속체역학)
1981.09 ~ 1982.06 UNIV DE METZ (박사-재료역학)
1977.09 ~ 1980.06 ECOLE NATIONALE SUPERIEURE D'ARTS ET METIERS (석사-기계공학)
1975.09 ~ 1977.06 기타기관 (학사-기계공학)

주요경력

1987.09 ~ 2007.09 : Alcoa Inc.
1986.09 ~ 1987.06 : Nate. Polytech. Inst. Grenoble
1984.09 ~ 1986.08 : Alcoa Inc.

전문분야

Visiting Professor of the Global Innovation Research Organization, Tokyo University of Agriculture and Technology, TUAT, Japan, 2018-01-17 to 02-16 and 2018-07-23 to 08-11
Editor-in-Chief, Elsevier book series in Plasticity of Materials (2018~)
Associate Editor, Interntional journal of Material Forming (2011-01-01~)
Editorial Consultant of International Journal of Plasticity (2018-01-01~)
Advisory Board Member of International Journal of Solids and Structures (2016-01-01~)

펼쳐보기

학술지

국제전문학술지

Modified Kocks-Mecking-Estrin Model to Account Nonlinear Strain Hardening, METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, , 50A, 513-517 (2019)
Numerical modeling for accurate prediction of strain localization in hole expansion of a steel sheet, INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES, , 156, 107-118 (2019)
Determining the coefficients of a homogeneous anisotropic hardening model for ultrathin steel sheets, INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES, , 157, 428-438 (2019)
Asymmetric rolling of interstitial free steel sheets: Microstructural evolution and mechanical properties, JOURNAL OF MANUFACTURING PROCESSES, , 31, 583-592 (2018)
Advanced constitutive modeling of advanced high strength steel sheets for springback prediction after double stage U-draw bending, INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES, , 151, 152-164 (2018)
Influence of Yield Stress Determination in Anisotropic Hardening Model on Springback Prediction in Dual-Phase Steel, JOM, , 70, 1560-1566 (2018)
Measurement of the strength differential effect of DP980 steel sheet and experimental validation using pure bending test, JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, , 256, 247-253 (2018)
Jose Joaquim In Memoriam, International Journal of Material Forming, , 11, 339-339 (2018)
Deformation-induced anisotropy of uniaxially prestrained steel sheets, INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES, , 134, 20-29 (2018)
Identification of Dynamic Flow Stress Curves Using the Virtual Fields Methods: Theoretical Feasibility Analysis, METALS AND MATERIALS INTERNATIONAL, , 24, 351-361 (2018)
A general linear method to evaluate the hardening behaviour of metals at large strain with full-field measurements, STRAIN, , 54, e12265- (2018)
Stress update algorithm based on finite difference method and its application to homogenous anisotropic hardening (HAH) model with non-associated flow, Journal of Physics: Conference Series, , 1063, 12011- (2018)
Modeling of Yield Surface Evolution in Uniaxial and Biaxial Loading Conditions using a Pre-strained Large Scale Specimen, AIP Conference Proceedings, , 1960, - (2018)
Advanced constitutive modeling for application to sheet forming, Journal of Physics: Conference Series, , 1063, 12002- (2018)
FE implementation of HAH model using FDM-based stress update algorithm for springback prediction of AHSS sheets, Journal of Physics: Conference Series, , 1063, 12021- (2018)
Application of the Virtual Fields Method to determine dynamic properties at intermediate strain rates, Journal of Physics: Conference Series, , 1063, 12041- (2018)
Prediction of plastic flow localization with shell element in thick AHSS sheets, Procedia Manufacturing, , 15, 861-868 (2018)
A crystal plasticity model for describing the anisotropic hardening behavior of steel sheets during strain-path changes, INTERNATIONAL JOURNAL OF PLASTICITY, , 111, 85-106 (2018)
Piecewise linear approximation of nonlinear unloading-reloading behaviors using a multi-surface approach, International Journal of Plasticity, , 93, 112-136 (2017)
Investigation of plastic strain rate under strain path changes in dual-phase steel using microstructure-based modeling, International Journal of Plasticity, , 93, 89-111 (2017)
Twist springback characteristics of dual-phase steel sheet after non-axisymmetric deep drawing, International Journal of Material Forming, , 10, 267-278 (2017)
Application of the virtual fields method to the identification of the homogeneous anisotropic hardening parameters for advanced high strength steels, International Journal of Plasticity, , 93, 229-250 (2017)
Crystal plasticity finite element analysis of ferritic stainless steel for sheet formability prediction, International Journal of Plasticity, , 93, 26-45 (2017)
Material modeling of 6016-O and 6016-T4 aluminum alloy sheets and application to hole expansion forming simulation, International Journal of Plasticity, , 93, 164-186 (2017)
A comparative study between micro- and macro-mechanical constitutive models developed for complex loading scenarios, International Journal of Plasticity, , 93, 212-228 (2017)
Mechanical, microstructural behaviour and modelling of dual phase steels under complex deformation paths, International Journal of Plasticity, , 93, 269-290 (2017)
Constitutive modeling for path-dependent behavior and its influence on twist springback, International Journal of Plasticity, , 93, 64-88 (2017)
Two-stage forming approach for manufacturing ferritic stainless steel bipolar plates in PEM fuel cell: Experiments and numerical simulations, International Journal of Hydrogen Energy, , 42, 6965-6977 (2017)
Effect of Rolling Parameters on Surface Strain Variation in Hot Strip Rolling, STEEL RESEARCH INTERNATIONAL, , 88, 1600492:1-1600492:13 (2017)
Mechanism of the Bauschinger effect in Al-Ge-Si Alloys, MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, , 684, 353-372 (2017)
Experimental verification of the tension-compression asymmetry of the flow stresses of a high strength steel sheet, Procedia Engineering, , 207, 1964-1969 (2017)
Determination of the dynamic strain hardening parameters from acceleration fields, Advancement of Optical Methods in Experimental Mechanics, , 3, 213-218 (2017)
Characterization of dynamic hardening behavior using acceleration information, Procedia Engineering, , 207, 245-250 (2017)
Measurement and analysis of the elastic-plastic deformation behavior of an ultra-thin austenitic stainless steel sheet subjected to in-plane reverse loading., Procedia Engineering, , 207, 1976-1981 (2017)
Advances in Constitutive Modeling of Plasticity for Forming Applications., Key Engineering Materials, , 725, 3-14 (2017)
Characterization of fracture in medium Mn steel, Materials Science and Engineering: A, , 687, 200-210 (2017)
Effect of martensitic phase transformation on the behavior of 304 austenitic stainless steel under tension, MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, , 649, 174-183 (2016)
Modelling and sensitivity analysis of twist springback in deep drawing of dual-phase steel, MATERIALS & DESIGN, , 90, 204-217 (2016)
Parameter reduction for the Yld2004-18p yield criterion, INTERNATIONAL JOURNAL OF MATERIAL FORMING, , 9, 175-178 (2016)
Application of Central Composite Design for Optimization of Two-Stage Forming Process Using Ultra-thin Ferritic Stainless Steel, METALS AND MATERIALS INTERNATIONAL, , 22, 276-287 (2016)
Examination and modeling of void growth kinetics in modern high strength dual phase steels during uniaxial tensile deformation, MATERIALS CHEMISTRY AND PHYSICS, , 172, 54-61 (2016)
Constitutive modelling of high strength titanium alloy Ti-6Al-4 V for sheet forming applications at room temperature, INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES, , 80, 334-347 (2016)
Transformation kinetics and density models of quenching and partitioning (Q&P) steels, Acta Materialia, , 109, 394-404 (2016)
Effect of Nonlinear Multi-axial Elasticity and Anisotropic Plasticity on Quasi-static Dent Properties of Automotive Steel Sheets, INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES, , 87, 254-266 (2016)
Mechanical behavior of low carbon steel subjected to strain path changes: Experiments and modeling, Acta Materialia, , 111, 305-314 (2016)
Evaluation of springback for DP980 S-rail part by anisotropic hardening models, JOM, , 68, 1850-1857 (2016)
Effect of slide motion on springback in 2-D draw bending for AHSS, INTERNATIONAL JOURNAL OF MATERIAL FORMING, , 9, 313-326 (2016)
Mechanical property of magnesium alloy sheet with hardening deterioration at warm temperatures and its application for failure analysis: Part I - property characterization, International Journal of Material Forming, , 9, 277-285 (2016)
Modeling of the Mechanical Response During Reversal Shear Loading: Application to Steels, STEEL RESEARCH INTERNATIONAL, , 87, 850-858 (2016)
Probing formability improvement of ultra-thin ferritic stainless steel bipolar plate of PEMFC in non-conventional forming process, METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, , 47, 4160-4174 (2016)
Experimental assessment of nonlinear elastic behaviour of dual-phase steels and application to springback prediction, International Journal of Mechanical Sciences, , 117, 1-15 (2016)
Modeling of localization and fracture phenomena in strain and stress space for sheet metal forming, International Journal of Material Forming, , 9, 573-584 (2016)
Parameter identification of the homogeneous anisotropic hardening model using the virtual fields method, International Journal of Material Forming, , 9, 691-696 (2016)
Thermal effects on the enhanced ductility in non-monotonic uniaxial tension of DP780 steel sheet, Metals and Materials International, , 22, 968-973 (2016)
Identification of nonlinear kinematic hardening constitutive model parameters using the virtual fields method for advanced high strength steels, International Journal of Solids and Structures, , 102, 30-43 (2016)
Numerical investigation of the post-necking behavior of aluminum sheets in the presence of geometrical and material inhomogeneities, International Journal of Solids and Structures, , 102, 56-65 (2016)
Advanced constitutive modeling of AHSS sheets forapplication to springback prediction after U-draw double stamping process, Journal of Physics: Conference Series, , 734, 4- (2016)
Mechanical behaviour of TWIP steel under shear loading, Journal of Physics: Conference Series, , 734, - (2016)
Prediction of part shape and associated material properties in hot-press forming using finite element analysis, Journal of Physics: Conference Series, , 734, 32024- (2016)
Validation of homogeneous anisotropic hardening approach based on crystal plasticity, AIP Conference Proceedings, , 1769, 1-6 (2016)
Identification of the YLD2000-2D model with the virtual fields method, SEM Proc. Conf. Series, , 9, 51-57 (2016)
Characterization of the dynamic strain hardening behavior from full-field measurements, SEM Proc. Conf. Series, , 9, 23-28 (2016)
Thermomechanical response of a TWIP steel during monotonic and non-monotonic uniaxial loading, Materials Science and Engineering: A, , 674, 276-285 (2016)
Effect of the determination method of the material parameters on the accuracy of forming limit analyses for 5000 series aluminum alloy, AIP Conference Proceedings 1769, 200009(1-4), , , - (2016)
Observations on the Nonlinear Unloading Behavior of Advanced High Strength Steels, METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, , 46A, 18-22 (2015)
Influence of Bainite Morphology on Ductile Fracture Behavior in a 0.4C-CrMoNi Steel, STEEL RESEARCH INTERNATIONAL, , 86, 528-535 (2015)
A microstructure-based model for describing the material properties of Al-Zn alloys during high pressure torsion, INTERNATIONAL JOURNAL OF PLASTICITY, , 68, 150-163 (2015)
Strain hardening rate sensitivity and strain rate sensitivity in TWIP steels, MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, , 629, 54-59 (2015)
Combined effects of anisotropy and tension-compression asymmetry on the torsional response of AZ31 Mg, INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES, , 58, 190-200 (2015)
Determination of Anisotropic Yield Coefficients by a Data-Driven Multiobjective Evolutionary and Genetic Algorithm, MATERIALS AND MANUFACTURING PROCESSES, , 30, 403-413 (2015)
Non-isothermal kinetics model to predict accurate phase transformation and hardness of 22MnB5 boron steel, MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, , 626, 67-73 (2015)
Evaluation of biaxial flow stress based on elasto-viscoplastic self-consistent analysis of X-ray diffraction measurements, INTERNATIONAL JOURNAL OF PLASTICITY, , 66, 103-118 (2015)
Stress update algorithm for enhanced homogeneous anisotropic hardening model, COMPUTER METHODS IN APPLIED MECHANICS AND ENGINEERING, , 286, 63-86 (2015)
Formability of AHSS under an Attach-Detach Forming Mode, STEEL RESEARCH INTERNATIONAL, , 86, 98-109 (2015)
EBSD Study of Damage Mechanisms in a High-Strength Ferrite-Martensite Dual-Phase Steel, JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE, , 24, 53-58 (2015)
EBSD study of micromechanisms involved in high deformation ability of DP steels, MATERIALS & DESIGN, , 87, 130-137 (2015)
Springback Reduction in Tailor Welded Blank with High Strength Differential by Using Multi-Objective Evolutionary and Genetic Algorithms, STEEL RESEARCH INTERNATIONAL, , 86, 1391-1402 (2015)
Void coalescence and fracture behavior of notched and un-notched tensile tested specimens in fine grain dual phase steel, MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, , 644, 210-217 (2015)
Mechanical behavior of Mg subjected to strain path changes: Experiments and modeling, INTERNATIONAL JOURNAL OF PLASTICITY, , 73, 171-183 (2015)
Stress development and shape change during press-hardening process using phase-transformation-based finite element analysis, INTERNATIONAL JOURNAL OF PLASTICITY, , 73, 142-170 (2015)
Experiment and modeling to investigate the effect of stress state, strain and temperature on martensitic phase transformation in TRIP-assisted steel, ACTA MATERIALIA, , 97, 435-444 (2015)
Modeling the Effect of Asymmetric Rolling on Mechanical Properties of Al-Mg Alloys, STEEL RESEARCH INTERNATIONAL, , 86, 922-931 (2015)
Enhancement in the Modeling of Temperature and Strain Rate-Dependent Plastic Hardening Behavior of a Sheet Metal, STEEL RESEARCH INTERNATIONAL, , 86, 902-914 (2015)
Modeling of the mechanical behavior and texture evolution in Zn alloys during reverse shear loading, JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, , 224, 143-148 (2015)
Constitutive and friction modeling for accurate springback analysis of advanced high strength steel sheets, INTERNATIONAL JOURNAL OF PLASTICITY, , 71, 113-135 (2015)
Measurement and modeling of simple shear deformation under load reversal: Application to advanced high strength steels, INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES, , 98, 144-156 (2015)
Bending Formability of Ferritic Stainless Steels for Application to Tubular Exhaust Manifolds, ISIJ INTERNATIONAL, , 55, 1048-1057 (2015)
Hardening behavior and texture evolution of TWIP steel during strain path change, IOP Conference Series-Materials Science and Engineering, , 82, - (2015)
An extended Modified Maximum Force Criterion for the prediction of localized necking under non-proportional loading, INTERNATIONAL JOURNAL OF PLASTICITY, , 75, 189-203 (2015)
Properties controlling the bend-assisted fracture of AHSS, INTERNATIONAL JOURNAL OF PLASTICITY, , 75, 100-120 (2015)
Isotropic to distortional hardening transition in metal plasticity, INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES, , 56–57, 11-19 (2015)
Modeling of forming limit for multilayer sheets based on strain-rate potentials, INTERNATIONAL JOURNAL OF PLASTICITY, , 75, 63-99 (2015)
Simulation of thermal distortion in hot press forming with dissimilar material TWB, Advanced Materials Research, , 1063, 330-333 (2015)
Effect of stress state and temperature on the kinetics of martensitic phase transformation in TRIP-assisted steel, Key Engineering Materials, , 651-6, 27-31 (2015)
Continuous strain path change simulations for sheet metal, COMPUTATIONAL MATERIALS SCIENCE, , 82, 286-292 (2014)
New Interpretation of Cyclic Swift Effects, European Journal of Mechanics A-Solids, , 44, 82-90 (2014)
Frictional behaviors of a mild steel and a TRIP780 steel under a wide range of contact stress and sliding speed., Journal of Tribology, , 136, 21606- (2014)
Relationship between micro- and macro- properties for eight commercial DP980 steels, Materials Science and Engineering A, , 597, 431-439 (2014)
Forming limit curves and forming limit stress curves for advanced high strength steels, Materials Science Forum, , 773-7, 109-114 (2014)
About the influence of hydrostatic pressure on the yielding and flow of metallic polycrystals, JOURNAL OF THE MECHANICS AND PHYSICS OF SOLIDS, , 67, 87-99 (2014)
Asymmetric rolling of thin AA-5182 sheets: Modelling and experiments, MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, , 603, 150-159 (2014)
Correlation between swift effects and tension-compression asymmetry in various polycrystalline materials, JOURNAL OF THE MECHANICS AND PHYSICS OF SOLIDS, , 70, 104-115 (2014)
Damage mechanism and modeling of void nucleation process in a ferrite-martensite dual phase steel, ENGINEERING FRACTURE MECHANICS, , 127, 97-103 (2014)
Evaluation of Fracture Micromechanisms in a Fine-Grained Dual Phase Steel during Uniaxial Tensile Deformation, STEEL RESEARCH INTERNATIONAL, , 85, 1386-1392 (2014)
Meso-Scopic Analysis of Strain Path Change Effect on the Hardening Behavior of Dual-Phase Steel, STEEL RESEARCH INTERNATIONAL, , 85, 1047-1057 (2014)
A Novel Multi-objective Genetic Algorithms-Based Calculation of Hill's Coefficients, METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, , 45, 2704-2707 (2014)
Influence of Tempering Temperature on Low Cycle Fatigue of High Strength Steel, ISIJ INTERNATIONAL, , 54, 979-984 (2014)
Multi-Objective Genetic Algorithm to Optimize Variable Drawbead Geometry for Tailor Welded Blanks Made of Dissimilar Steels, STEEL RESEARCH INTERNATIONAL, , 85, 1597-1607 (2014)
Design of High Strength Differential TWB to Enhance Drawability: FE Study and Optimization, INTERNATIONAL JOURNAL OF PRECISION ENGINEERING AND MANUFACTURING, , 15, 2273-2283 (2014)
Correlations between nanoindentation hardness and macroscopic mechanical properties in DP980 steels, MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, , 597, 431-439 (2014)
A semi-analytic model to predict and compensate springback in the 3D stretch bending process, STEEL RESEARCH INTERNATIONAL, , 85, 697-709 (2014)
Enhancements of homogenous anisotropic hardening model and application to mild and dual-phase steels, INTERNATIONAL JOURNAL OF PLASTICITY, , 58, 201-218 (2014)
Determination of the anisotropic plastic constitutive parameters using the virtual fields method, EXPERIMENTAL MECHANICS, , 54, 1189-1204 (2014)
On twist springback prediction of asymmetric tube in rotary draw bending with different constitutive models, INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES, , 89, 311-322 (2014)
Influence of contact friction on the experimental determination of the balanced biaxial strain-ratio using the disc compression test, MATERIAL FORMING ESAFORM 2014, , 611-6, 529-535 (2014)
Parameter Determination of Anisotropic Yield Criterion, Conference Proceedings of the Society for Experimental Mechanics Series, , 8, 253-257 (2014)
Prediction of ridging by 3-dimensional texture in ferritic stainless steels, Key Engineering Materials, , 622-6, 72-76 (2014)
U-draw bending of DP780 in non-conventional drawing mode using direct-drive digital servo-press, 11TH INTERNATIONAL CONFERENCE ON TECHNOLOGY OF PLASTICITY, ICTP 2014, , 81, 987-992 (2014)
Thermo-mechanical-metallurgical modeling for hot-press forming in consideration of the prior austenite deformation effect., INTERNATIONAL JOURNAL OF PLASTICITY, , 58, 154-183 (2014)
Extension of strain-life equation for low-cycle fatigue of sheet metals using anisotropic yield criteria and distortional hardening model, FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES, , 37, 977-991 (2014)
A pragmatic approach to accommodate in-plane anisotropy in forming limit diagram, MECHANICS RESEARCH COMMUNICATIONS, , 62, 5-17 (2014)
Material modelling and springback analysis for multi-stage rotary draw bending of thin-walled tube using homogeneous anisotropic hardening model, 11TH INTERNATIONAL CONFERENCE ON TECHNOLOGY OF PLASTICITY, ICTP 2014, , 81, 1228-1233 (2014)
Numerical simulation of the mechanical response during strain path change: application to Zn alloys., 11TH INTERNATIONAL CONFERENCE ON TECHNOLOGY OF PLASTICITY, ICTP 2014, , 81, 1300-1305 (2014)
HYDRAULIC BULGE TEST FOR STRESS-STRAIN CURVE DETERMINATION AND DAMAGE CALIBRATION FOR ITO-GOYA MODEL, 11TH WORLD CONGRESS ON COMPUTATIONAL MECHANICS; 5TH EUROPEAN CONFERENCE ON COMPUTATIONAL MECHANICS; 6TH EUROPEAN CONFERENCE ON COMPUTATIONAL FLUID DYNAMICS, VOLS II - IV, , , 4223-4238 (2014)
Strain rate dependent tensile behavior of advanced high strength steels: Experiment and constitutive modeling, MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTI, , 559, 223-231 (2013)
New interpretation of monotonic Swift effects: Role of tension–compression asymmetry, Mechanics of Materials, , 57, 42-52 (2013)
Nonlinear elastic behaviors of low and high strength steels in unloading and reloading, Materials Science and Engineering: A, , 562, 161-171 (2013)
A Springback Compensation Strategy and Applications to Bending Cases, STEEL RESEARCH INTERNATIONAL, , 84, 463-472 (2013)
New convex yield functions for orthotropic metal plasticity, International Journal of Non-Linear Mechanics, , 51, 97-111 (2013)
Numerical procedures for predicting localization in sheet metals using crystal plasticity, Computational Materials Science, , 72, 107-115 (2013)
Extension of homogeneous anisotropic hardening model to cross-loading with latent effects, International Journal of Plasticity, , 46, 130-142 (2013)
Formability of austenitic and ferritic stainless steels at warm forming temperature, INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES, , 75, 94-109 (2013)
Formability prediction of advanced high strength steels using constitutive models characterized by uniaxial and biaxial experiments, JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, , 213, 1929-1942 (2013)
Characterization of the post-necking strain hardening behavior using the virtual fields method, INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES, , 50, 3829-3842 (2013)
A dislocation-based hardening model incorporated into an anisotropic hardening approach, COMPUTATIONAL MATERIALS SCIENCE, , 79, 570-583 (2013)
Stress relaxation and its effect on tensile deformation of steels, MATERIALS & DESIGN, , 52, 284-288 (2013)
Experiments and Modeling of Low Carbon Steel Sheet Subjected to Double Strain Path Changes, METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, , 44A, 4475-4479 (2013)
Strain hardening response and modeling of EDDQ and DP780 steel sheet under non-linear strain path, MECHANICS OF MATERIALS, , 64, 11-26 (2013)
Experimental and theoretical formability analysis using strain and stress based forming limit diagram for advanced high strength steels, MATERIALS & DESIGN, , 51, 756-766 (2013)
Experimental and Numerical Analyses of Hot Stamped Parts with Tailored Properties, ISIJ INTERNATIONAL, , 53, 1047-1056 (2013)
A crystallographic dislocation model for describing hardening of polycrystals during strain path changes. Application to low carbon steels, INTERNATIONAL JOURNAL OF PLASTICITY, , 46, 54-69 (2013)
Extension of quasi-plastic-elastic approach to incorporate complex plastic flow behavior - application to springback of advanced high-strength steels, INTERNATIONAL JOURNAL OF PLASTICITY, , 45, 140-159 (2013)
New balanced biaxial testing of advanced high strength steels for large strain at elevated temperatures, EXPERIMENTAL MECHANICS, , 53, 1681-1692 (2013)
Stress relaxation for formability improvement, Key Engineering Materials, , 554-5, 145-150 (2013)
A theoretical study of the effect of the double strain path change on the forming limits of metal sheet, Key Engineering Materials, , 554-5, 127-138 (2013)
Transient negative strain hardening during severe plastic deformation of Al-30wt%Zn alloys, Key Engineering Materials, , 554-5, 3-11 (2013)
A microstructure-based model for describing strain softening during compression of Al-30%wt Zn alloy, International Journal of Multiphysics, , 7, 77-86 (2013)
A microstructure-based model for describing softening process during compression of Al-30%wt Zn alloy, International Review of Mechanical Engineering, , 7, 1115-1120 (2013)
Finite element modeling using homogeneous anisotropic hardening and application to spring-back prediction, INTERNATIONAL JOURNAL OF PLASTICITY, , 29, 13-41 (2012)
Application of crystal plasticity to an austenitic stainless steel., Model. Simul. Mat. Sci. Eng., , 20, 24009- (2012)
Crystal plasticity approach for predicting the Bauschinger effect in dual-phase steels, Materials Science and Engineering A, , 539, 259-270 (2012)
Hole expansion of twinning-induced plasticity steel, SCRIPTA MATERIALIA, , 66, 1012-1017 (2012)
An application of homogeneous anisotropic hardening to springback prediction in pre-strained U-draw/bending, INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES, , 49, 3562-3572 (2012)
Stress integration schemes for novel homogeneous anisotropic hardening model, COMPUTER METHODS IN APPLIED MECHANICS AND ENGINEERING, , 247-2, 73-92 (2012)
The forming limit diagram of ferritic stainless steel sheets: Experiments and modeling, INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES, , 64, 1-10 (2012)
A sheet tension/compression test for elevated temperature, International Journal of Plasticity, , 38, 27-46 (2012)
Modeling of microstructure evolution considering austenite deformation effects during hot-press forming, STEEL RESEARCH INTERNATIONAL, , , 915-918 (2012)
Surface roughening of ferritic stainless steel sheets and its application to the forming limit diagram, STEEL RESEARCH INTERNATIONAL, , , 975-978 (2012)
Effect of slide velocity on springback in U-draw bending of AHSS sheets with digital servo-press, STEEL RESEARCH INTERNATIONAL, , , 347-350 (2012)
Prediction of nonlinear kinematic hardening parameters for DP steels by crystal plasticity-based micromechanical analysis, Advanced Science Letters, , 13, 224-227 (2012)
Hot press forming of tailor welded blank: Experiments and FE modeling, ISIJ International, , 52, 2059-2068 (2012)
Comparison of forming limits predicted using phenomenological and crystal plasticity models., Steel Research International: Metal forming, , , 1123-1126 (2012)
Investigation on Formability and Strength Differential in Hot Press Forming of Tailor Welded Blanks, STEEL RESEARCH INTERNATIONAL, , , 267-270 (2012)
Crystal plasticity predictions of cyclic simple shear flow stress, Materials Science Forum, , 702-7, 204-207 (2012)
Microstructural and crystallographic aspects of yield surface evolution, Materials Science Forum, , 702-7, 224-228 (2012)
Unconditionally convex yield functions for sheet metal forming based on linear stress deviator transformation, Key Engineering Materials, , 504-5, 667-672 (2012)
Crystal plasticity predictions of forward-reverse simple shear flow stress, Materials Science Forum, , 702-7, 204-207 (2012)
Forming limit and fracture mechanism of ferritic stainless steel sheets, MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, , 528, 3113-3121 (2011)
Modelling the plastic behaviour of metals under complex loading conditions, MODELLING AND SIMULATION IN MATERIALS SCIENCE AND ENGINEERING, , 19, 3500901-3500909 (2011)
Study on plastic flow localization prediction using a physically-based hardening model, COMPUTATIONAL MATERIALS SCIENCE, , 50, 2688-2697 (2011)
Analysis of sheet metal formability through isotropic and kinematic hardening models, EUROPEAN JOURNAL OF MECHANICS A-SOLIDS, , 30, 532-546 (2011)
A new analytical theory for earing generated from anisotropic plasticity, INTERNATIONAL JOURNAL OF PLASTICITY, , 27, 1165-1184 (2011)
An alternative to kinematic hardening in classical plasticity, INTERNATIONAL JOURNAL OF PLASTICITY, , 27, 1309-1327 (2011)
Application of homogeneous potentials for the modeling of the Bauschinger effects in ultra low carbon steel, AIP Conference Proceedings, , 1353, 1453-1457 (2011)
Microstructural effects on yield surface evolution in cubic metals using the viscoplastic phi-model, INTERNATIONAL JOURNAL OF PLASTICITY, , 27, 102-120 (2011)
A study of the Yld2004 yield function and one extension in polynomial form: A new implementation algorithm, modeling range, and earing predictions for aluminum alloy sheets, EUROPEAN JOURNAL OF MECHANICS A-SOLIDS, , 30, 807-819 (2011)
Gripless nanotension test for determination of nano-scale properties, INTERNATIONAL JOURNAL OF PLASTICITY, , 27, 1527-1536 (2011)
Modelling direction-dependent Hardening in Magnesium Sheet Forming Simulations, International Journal of Material Forming, , 4, 243-253 (2011)
Evaluation of anisotropic yield functions characterized by uni-axial, in-plane bi-axial and plane strain experiments., AIP Conference Proceedings, , 1353, 1458-1463 (2011)
Comparative study of the prediction of microstructure and mechanical properties for a hot-stamped B-pillar reinforcing part, INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES, , 53, 744-752 (2011)
Finite element modeling using homogeneous anisotropic hardening and application to spring-back prediction, International Journal of Plasticity, , 29, 13-41 (2011)
Advances in sheet forming - Materials modeling, numerical simulation, and press technologies, JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME, , 133, 61001- (2011)
Experimental and numerical investigation of surface roughness in ferritic stainless steel., Steel Research International, Special Edition: ICTP, , , 808-813 (2011)
Determination of the forming limit diagram of an ultra-thin ferritic stainless steel sheet., AIP Conference Proceedings, , 1383, 815-820 (2011)
Plastic instability in complex strain paths predicted by advanced constitutive equations, AIP Conference Proceedings, , 1383, 194-201 (2011)
Evaluation of constitutive models for springback prediction in U-draw/bending of DP and TRIP steel sheets, AIP Conference Proceedings, , 1383, 571-578 (2011)
Effect of Strain Rate, Adiabatic Heating and Phase Transformation Phenomena on the Mechanical Behaviour of Stainless Steel, STRAIN, , 46, 283-297 (2010)
Constitutive modeling of ferritic stainless steel, INTERNATIONAL JOURNAL OF MATERIAL FORMING, , 3, 135-145 (2010)
Convex polynomial yield functions, JOURNAL OF THE MECHANICS AND PHYSICS OF SOLIDS, , 58, 1804-1818 (2010)
Advanced Steel Design by Multi-Scale Modeling, MATERIALS SCIENCE FORUM, , 654-6, 41-46 (2010)
Sheet metal forming limit predictions based on advanced constitutive equations, INTERNATIONAL JOURNAL OF MATERIAL FORMING, , 3, 179-182 (2010)
Investigations upon the algebraic structure of some recently proposed yield criteria, INTERNATIONAL JOURNAL OF MATERIAL FORMING, , , - (2010)
A Shear Fracture Criterion to Predict Limit Strains in Sheet Metal Forming, INTERNATIONAL JOURNAL OF MATERIAL FORMING, , 3, - (2010)
HOLE EXPANSION OF ADVANCED HIGH STRENTH STEEL SHEET SAMPLE, INTERNATIONAL JOURNAL OF MATERIAL FORMING, , 3, 247-250 (2010)
A novel approach for anisotropic hardening modeling. Part II: Anisotropic hardening in proportional and non-proportional loadings, application to initially isotropic material, INTERNATIONAL JOURNAL OF PLASTICITY, , 26, 1029-1049 (2010)
Advances in Anisotropy and Formability, INTERNATIONAL JOURNAL OF MATERIAL FORMING, , , - (2010)
A new model for FLD prediction based on advanced constitutive equations, INTERNATIONAL JOURNAL OF MATERIAL FORMING, , 3, 191-204 (2010)
Modeling the behavior and formability of high Mn steel, Steel Research International, , 81, 1352-1355 (2010)
On the determination of flow stress using bulge test and mechanical measurement, AIP Conference Proceedings, , 1252, 845-852 (2010)
Sheet forming simulations of automotive parts using different yield functions, AIP Conference Proceedings, , 1252, 361-368 (2010)
Hole Expansion Simulations of TWIP Steel Sheet Sample, AIP Conference Proceedings 1252 CDROM, , 1252, 1272-1278 (2010)
Effect of asymmetric rolling on plastic anisotropy of low carbon steels during simple shear tests, AIP Conference Proceedings, , , 181-184 (2010)
Effect of asymmetric rolling on plastic anisotropy of low carbon steels during simple shear tests., AIP Conference Proceedings, , 1252, 181-184 (2010)
Application of strain rate potentials with multiple linear transformations to the description of polycrystal plasticity, International Journal of Solids and Structures, , 46, 1966-1974 (2009)
APPLICATION OF STRAIN RATE POTENTIALS WITH MULTIPLE LINEAR TRANSFORMATIONS TO THE DESCRIPTION OF POLYCRYSTAL PLASTICITY, INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES, , 46, 1966-1974 (2009)
Finite Element Modeling of Plane Strain Toughness for 7085 Aluminum Alloy, METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, , 40A, 354-364 (2009)
EXPERIMENTAL AND ANALYTICAL INVESTIGATIONS ON PLANE STRAIN TOUGHNESS FOR 7085 ALUMINUM ALLOY, METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, , 40, 365-376 (2009)
Themo-Mechanical and Microstructural Modeling of Friction Stir Welding of 6111-T4 Aluminum Alloys, METALS AND MATERIALS INTERNATIONAL, , 15, 125-132 (2009)
Parameter identification of advanced plastic strain rate potentials and impact on plastic anisotropy prediction, INTERNATIONAL JOURNAL OF PLASTICITY, , 25, 491-512 (2009)
A novel approach for anisotropic hardening modeling - Part I: Theory and its application to finite element analysis of deep drawing, International Journal of Plasticity, , , - (2009)
Delamination Cracking in Advanced Aluminum-Lithium alloys - Experimental and Computational Studies, Engineering Fracture Mechanics, , , - (2009)
Delamination cracking in advanced aluminum-lithium alloys - Experimental and computational studies, ENGINEERING FRACTURE MECHANICS, , 76, 2174-2191 (2009)
A novel approach for anisotropic hardening modeling. Part I: Theory and its application to finite element analysis of deep drawing, INTERNATIONAL JOURNAL OF PLASTICITY, , 25, 2383-2409 (2009)
A new model for FLD prediction based on advanced constitutive equations, International Journal of Material Forming, , , 1-14 (2009)
Mechanical behavior of an asymmetrically rolled and annealed 1050-O sheet, INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES, , 50, 1372-1380 (2008)
Unconstrained springback behavior of Al-Mg-Si sheets for different sitting times, INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES, , 50, 1381-1389 (2008)
An elasto-plastic constitutive model with plastic strain rate potentials for anisotropic cubic metals, INTERNATIONAL JOURNAL OF PLASTICITY, , 24, 2298-2334 (2008)
FINITE ELEMENT ANALYSIS OF ALUMINUM TUBE HYDROFORMING BASED ON NON-QUADRATIC YIELD FUNCTION, INTERNATIONAL JOURNAL OF MANUFACTURING TECHNOLOGY AND MANAGEMENT, , 14, 84-99 (2008)
Orthotropic yield criteria for description of the anisotropy in tension and compression of sheet metals, INTERNATIONAL JOURNAL OF PLASTICITY, , 24, 847-866 (2008)
Effect of Strain Rate, Adiabatic Heating and Phase Transformation Phenomena on the Mechanical Behaviour of Stainless Steel, strain, , , - (2008)

국내전문학술지

일반학술지

Evolutionary optimization to determine optimal conditions of variable blank holding force for springback reduction in AHSS-mild steel TWBs, AIP Conference Proceedings, , 1567, 780-783 (2014)
Evaluation of anisotropic hardening models using two-steps tension tests, Transactions of Materials Processing, , 12, 372-377 (2012)
Anisotropic yield conditions in mathematical theory of plasticity, Journal of the Japan Society for Technology of Plasticity, , 57, 230-243 (0020)

학술회의논문

Constitutive description of dual phase steel under non-proportional loading using distortional hardening approach, ADVANCED CONSTITUTIVE MODELS IN SHEET METAL FORMING, 0, 0, 143-148 (2015)
Constitutive modeling for quasi-static dent analysis of automotive steel sheets, ADVANCED CONSTITUTIVE MODELS IN SHEET METAL FORMING, 0, 0, 103-106 (2015)
Strain path dependent evolution of yield locus based on HAH model description, INNOVATIONS FOR THE SHEET METAL INDUSTRY, 0, 0, 163-168 (2014)
Warm bulge testing of advanced high strength steels, -, 0, 0, - (2013)
Evaluation of constitutive models for springback prediction in U-draw/bending of DP and TRIP steel sheet, AIP CONFERENCE PROCEEDINGS 1383, 0, 0, - (2011)
Plastic instability in complex strain paths predicted by advanced constitutive equations, AIP CONFERENCE PROCEEDINGS 1383, 0, 0, - (2011)
Determination of the forming limit diagram of an ultra-thin ferritic stainless steel sheet, AIP CONFERENCE PROCEEDINGS 1383, 0, 0, - (2011)
Through–thickness compression testing and modeling of ferritic stainless steel sheets., PROCEEDINGS OF PLASTICITY’11, 0, 0, - (2011)
Plastic flow and localization in ferritic stainless steel., PROCEEDINGS OF PLASTICITY’11, 0, 0, - (2011)
Application of crystal plasticity model to 304 austenitic stainless steel, PROC. YOUNG RESEARCHER'S ASIAN WORKSHOP ON ADVANCED FORMING TECHNOLOGY, 0, 0, 37-39 (2010)
Tensile behavior of asymmetrically rolled if steel sheets, TENSILE BEHAVIOR OF ASYMMETRICALLY ROLLED IF STEEL SHEETS, 0, 0, - (2010)
Numerical sheet forming simulation from an industrial perspective, THE 2009 INTERNATIONAL SYMPOSIUM ON AUTOMOBILE STEEL, 0, 0, 64-74 (2009)
Crystal plasticity modelling of ferritic stainless steel sheets, KOREAN INSTITUTE OF METALS AND MATERIALS, 0, 0, S6-13 (2009)
Prediction of polycrystalline yield surfaces for FCC metals using a new viscoplastic intermediate approach, IINT. J. MATERIAL FORMING 2 SUPPL. 1, 0, 0, - (2009)
A novel approach for modeling of anisotropic hardening and non proportional loading paths, application to finite element analysis of deep drawing., INT. J. MATERIAL FORMING 2 SUPPL. 1, 0, 0, 367-370 (2009)
Effect of asymmetrical rolling and annealing the mechanical response of an 1050-o sheet, INT. J. MATERIAL FORMING 2 SUPPL. 1, 0, 0, 891-894 (2009)
Constitutive modelling of ferritic stainless steel sheets, INT. J. MATERIAL FORMING 2 SUPPL. 1, 0, 0, 391-394 (2009)
Analytical prediction of earing evolution during drawing and ironing operations, MACRO- TO NANO-SCALE INELASTIC BEHAVIOR OF MATERIALS: PLASTICITY, FATIGUE, AND FRACTURE., 0, 0, 145-147 (2009)
Modeling plastic anisotropy and strength differential effects in metallic materials, IN: MULTISCALE MODELING OF HETEROGENEOUS MATERIALS: FROM MICROSTRUCTURE TO MACRO-SCALE PROPERTIES, 0, 0, 71-97 (2008)
A general anisotropic yield function reduced to plane stress, International Symposium on Automotive Sheet Metal Forming, 0, 0, 1-6 (0000)
Analytical approach to predict anisotropic material properties from cup drawings, 11th ESAFORM 2008 Conference on Material Forming, 0, 0, 614-617 (0000)
Modeling of plastic anisotropy with reduced polycrystalline models, 11th ESAFORM 2008 Conference on Material Forming, 0, 0, 174-177 (0000)
Analytical prediction of earing for drawn and ironed cups, 7th International conference and Workshop on Numerical Simulations of Sheet Metal Forming Processes, 0, 0, 97-100 (0000)
Formulation of forming limit diagram for sandwich sheet with anisotropic strain-rate potential, 7th International conference and Workshop on Numerical Simulations of Sheet Metal Forming Processes, 0, 0, 337-342 (0000)
Material modeling for sheet forming applications, 7th International conference and Workshop on Numerical Simulations of Sheet Metal Forming Processes, 0, 0, 27-36 (0000)
Disk compression testing of advanced steel sheet samples, 9th International Conference on Technology of Plasticity (ICTP 2008), 0, 0, 2312-2317 (0000)
On the Use of Stress-Based Forming Limit Curve for Forming and Fracture, 9th International Conference on Technology of Plasticity (ICTP 2008), 0, 0, 708-721 (0000)
Strain rate potentials with increasing accuracy for sheet forming simulations, 9th International Conference on Technology of Plasticity (ICTP 2008), 0, 0, 1650-1655- (0000)
Analytical prediction of earing evolution during drawing and ironing operations, Macro- to Nano-scale Inelastic Behavior of Materials: Plasticity, Fatigue, and Fracture. Proceeding, 0, 0, 145-147 (0000)
Plastic anisotropy in high strength TWIP steels, Macro- to Nano-scale Inelastic Behavior of Materials: Plasticity, Fatigue, and Fracture. Proceeding, 0, 0, 370-372 (0000)

학회발표

Constitutive Modeling, NO, 0, 0, - (2018)
Simplified Representations of Multiaxial Test Results in Plasticity., (No proceedings), 0, 0, - (2017)
Applying the virtual fields method to the identification of homogeneous anisotropic hardening constitutive parameters., ADVANCEMENT IN THEORETICAL AND APPLIED PLASTICITY, 0, 0, 196-198 (2016)
Advanced constitutive modeling and application to industrial forming processes, MATEC WEB OF CONFERENCES 80, 0, 0, - (2016)
FE simulation of microstructure evolution consider-ing prior austenite deformation in hot press forming of a U-channel., ., 0, 0, - (2013)
Tailored material properties in hot press forming, ., 0, 0, - (2013)
Influence of BHF-punch motion on drawability of AHSS sheets, ., 0, 0, 481-486 (2013)
Constitutive modeling for sheet metal forming simulations., ., 0, 0, - (2012)
On the stress integration algorithm for homogeneous yield function-based anisotropic hardening model., ., 0, 0, - (2012)
Strain hardening for steel under non-proportional loading., ., 0, 0, - (2012)
Hole expansion of Dual Phase steels, ., 0, 0, - (2012)
Relationship between Material Properties and Local Formability of DP980 Steels, ., 0, 0, - (2012)
On nano-mechanical testing for acquisition of nano-scale material properties, ., 0, 0, - (2012)
Macroscopic constitutive modeling of a TWIP steel sheet sample, ., 0, 0, - (2011)
Macroscopic constitutive modeling of a twip steel sheet sample, ., 0, 0, - (2011)
Application of homogeneous potentials for the modeling of the Bauschinger effects in ultra low carbon steel, ., 0, 0, - (2011)
Evaluation of anisotropic yield functions characterized by uni-axial, in-plane, bi-axial and plane strain experiments, ., 0, 0, - (2011)
Modeling of the Bauschinger effect and springback in dual-phase steels., PROCEEDINGS OF THE 6TH BRAZILIAN CONFERENCE ON MANUFACTURING ENGINEERING, 0, 0, - (2011)
An application of the VPSC model to a commercial 304 austenitic stainless steel., PROCEEDINGS OF 2011 TMS ANNUAL MEETING & EXHIBITION, 0, 0, - (2011)
A general anisotropic yield function reduced to plane stress, Invited presentation at the International Symposium on Automotive Sheet Metal Forming, 0, 0, - (0000)
Modeling plane strain toughness in 7085 aluminum alloy, 14th International Symposium on Plasticity (Plasticity 2008), 0, 0, - (0000)
Influence of crystallographic texture on fracture resistance, 15th International Conference on the Textures of Materials (ICOTOM 15), 0, 0, - (0000)

단행본

Anisotropic Plasticity and Application to Plane Stress, Encyclopedia of Continuum Mechanics, Springer, 10, BARLAT, FG (2018)
Modeling Materials and Processes, in Memory of Dr. José J. Grácio, International Journal of Materials Forming, Volume 11 (2) and Volume 11 (3), 297-337, 3, BARLAT, FG (2018)
Special Issue with a Selection of Papers from the NUMISHEET 2016 Conference, International Journal of Structures and Solids, Volume 151, 232, BARLAT, FG (2018)
Constitutive Descriptions of Plasticity at Various Scales in memory of Prof. José J. Grácio., International Journal of Plasticity, 290, BARLAT, FG (2017)
60 Excellent Inventions in Metal Forming, Springer, 6, Barlat Frederic Gerard (2015)
Comprehensive Materials Processing, Elsevier, 5634, (2014)
Microstructure-based Constitutive Models in Plasticity., International Journal of Plasticity, Volume 46,, , (2013)
Microstructure-based Constitutive Models in Plasticity., International Journal of Plasticity, Volume 46,, , (2013)
Microstructure-based Constitutive Models in Plasticity., International Journal of Plasticity, Volume 46,, , (2013)
New Challenges in Mechanics and Materials for Sheet Metal Forming., International Journal of Solid and Structures, Volume 49, Issue 25, , (2012)
New Challenges in Mechanics and Materials for Sheet Metal Forming., International Journal of Solid and Structures, Volume 49, Issue 25, , (2012)
New Challenges in Mechanics and Materials for Sheet Metal Forming., International Journal of Solid and Structures, Volume 49, Issue 25, , Frederic Gerard B (2012)
Proceeding of the 8th International Conference and Workshop on Numerical Simulation of 3D Sheet Metal Forming Processes(NUMISHEET2011), AIP Conference Proceedings, , (2011)
Proceeding of the 10th International Conference on Numerical Methods in Industrial Forming Processes, AIP Conference Proceedings, , (2010)

연구실적

SERVO프레스를 이용한 연료전지 분리판용 400계 STS강의 성형성 개선 연구, (주)포스코 (2011-2012)
INTELLIGENT FORMING TECHNOLOGY BY MOTION CONTROL FOR AHSS SHEET APPLICATIONS, (주)포스코 (2012-2013)
FORMING OF PEMFC METALLIC BIPOLAR PLATES BY USING DIGITAL SERVO-PRESS, (주)포스코 (2013-2014)
HOT RESEARCH TOPIC ASSESSMENT, 포항공대산학협력단 (2013-2014)
DEVELOPMENT OF NUMERICAL MODEL AND SOFTWARE TO PREDICT STRENGTH AND SHAPE IN HPF, (주)포스코 (2014-2015)
PEMFC용 극박 POS470FC 스프링백 저감 및 성형정밀도 향상기술 개발, (주)포스코 (2014-2015)
가상필즈법을 이용한 AHSS 판재의 이방성 항복함수 및 대변형 응력-변형율 물성 확보, (주)포스코 (2014-2015)
STUDY ON RECENT TREND IN FRACTURE MECHANICS FOR STEEL INDUSTRY, 포항공대산학협력단 (2014-2015)
AHSS용 고차원 물성모델에 의한 다단 판재성형 해석 정확도 향상, (주)포스코 (2014-2015)
DEVELOP HPF PROJECT BETWEEN MML, VOLKSWAGEN AND POSCO, 포항공대산학협력단 (2014-2015)
가상필즈법을 이용한 대변형 및 고속변형 물성평가 기술 개발, (주)포스코 (2015-2016)
CHARACTERIZATION OF THE POST-NECKING STRAIN HARDENING BEHAVIOR OF TITANIUM SHEET MATERIAL, 포항공대산학협력단 (2015-2016)
MODELING AND VALIDATION OF MULTI-STAGE STAMPING PROCESSES FOR AHSS SHEETS, (주)포스코 (2015-2016)
DEVELOPMENT OF NUMERICAL MODEL AND SOFTWARE TO APPLY PARTIAL HEATING IN HPF, (주)포스코 (2015-2016)
FRACTURE ASPECTS IN AHSS STEEL SHEETS, 포항공대산학협력단 (2015-2016)
DEVELOPMENT OF PRECISE FORMING FEA TOOLS ON AHSS FOR CHASSIS AND FRAME, (주)포스코 (2016-2017)
[기술개발비과제]CHARACTERIZATION OF HOLE EXPANSION BEHAVIOR USING ADVANCED ANISOTROPIC YIELD FUNCTIONS, 포항공대산학협력단 (2016-2017)
DEVELOPMENT OF FRACTURE CRITERION FOR SHEAR-INDUCED FRACTURE IN AHSS, (주)포스코 (2017-2018)
[기술개발비] CHARACTERIZATION OF FRACTURE IN THIRD GENERATION MEDIUM MN AHSS, 포항공대산학협력단 (2017-2018)
DEVELOPMENT OF PRECISE FORMING FEA TOOLS ON AHSS FOR CHASSIS AND FRAME, (주)포스코 (2017-2018)
DEVELOPMENT OF FRACTURE CRITERION FOR SHEAR-INDUCED FRACTURE IN AHSS (2/3), (주)포스코 (2018-2019)
METAL 잔류응력 해소를 위한 소성변형 후처리 기술 개발, 삼성전자(주) (2018-2018)
DEVELOPMENT OF GENERAL MATERIAL MODEL FOR PRECISE PREDICTION OF DEFORMATION BEHAVIOR IN MULTI-STAGE FORMING, (주)포스코 (2018-2019)
자체연구개발과제[2015년 신설], 포항공과대학교 (2018-2033)
전 영역 광 계측 기술과 가상 필드법을 이용한 소재 물성 평가법 개발, 삼성전자(주) (2019-2019)
DEVELOPMENT OF FRACTURE CRITERION FOR SHEAR-INDUCED FRACTURE IN AHSS (3/3), (주)포스코 (2019-2020)
[4.17903_기술개발]강판소재 성형공정 시뮬레이션용 파괴예측 모델 개발, 포항공대산학협력단 (2019-2020)
DEVELOPMENT OF GENERAL MATERIAL MODEL FOR PRECISE PREDICTION OF DEFORMATION BEHAVIOR IN MULTI-STAGE FORMING, (주)포스코 (2019-2020)
[4.18329_기술개발]실물 성형 해석을 위한 비선형 변형경로 변경 예측 모델 개발, 포항공대산학협력단 (2019-2020)
TIME DEPENDENT MATERIAL MODEL DEVELOPMENT FOR ELASTIC MODULUS DEGRADATION AND RECOVERY, (주)포스코 (2020-2021)
[4.19171_기술개발]탄성회복의 재료학적 메커니즘 규명 및 재료모델 개발, 포항공대산학협력단 (2020-2021)
DEVELOPMENT OF GENERAL MATERIAL MODEL FOR PRECISE PREDICTION OF DEFORMATION BEHAVIOR IN MULTI-STAGE FORMING, (주)포스코 (2020-2021)
[4.20277_기술개발] 비선형 변형경로를 고려한 구성방정식 모델 검증, 포항공대산학협력단 (2020-2021)

IP

김종민,Barlat Frederic Gerard,이명규, 마찰계수 측정장치, 한국, 10-2013-0049632 (2013)
김종민,Barlat Frederic Gerard,이명규, 차체의 충돌에너지 흡수구조 및 차체의 충돌에너지 흡수방법, 한국, 10-2013-0052287 (2011)